View:
  • Shake and incubate samples simultaneously
  • Complete with shaking racks for 15ml and 50ml conical tubes
  • Intelligent, digital control
  • Broad temperature and speed range

Designed for simultaneous heating and mixing of small samples, the VorTemp 1550 is supplied with interchangeable platforms for standard 15ml and 50ml conical tubes. Maximum capacity is 8 x 50mL or 18 x 15mL. Temperature in the VorTemp 1550 is adjustable over a broad range, making the unit useful for a variety of applications, including bacterial cultures and digestions. Mechanical convection provides a uniform and stable environment within the chamber. The VorTemp 1550 may also be used in the cold room for subambient applications.


Shaking speed as well as acceleration rates are adjustable. Acceleration can be set to three different levels to protect delicate samples.


A microprocessor controls all parameters including temperature and timed operation. Self-diagnostic software continuously monitors the unit for proper temperature and shaking speed, alerting the user to any errors. Heating and shaking are controlled by feedback loops which precisely maintain chosen parameters, independent of load or voltage fluctuations.


The sturdy construction of the VorTemp 1550 gives it stability during high speed shaking. The chamber is insulated to maintain temperature and reduce operating noise.

Product Specifications
Temperature range Ambient +5° to 100°C
Temperature accuracy ±0.5°C
Speed range 200-900 rpm
Motion/orbit Horizontally circular/3 mm
Capacity 8 x 50ml / 18 x 15ml
Dimensions (W x D x H) 8.9 x 12.3 x 13 inches/22.5 x 12.3 x 33 cm
Weight 26 lb/11.8 kg
Electrical* 120V or 230V, 50/60 Hz
Item#:
ASSHAKER24
  • Precision temperature control, up to 75°
  • Dual-Convection technology, excellent uniformity and recovery
  • Includes SureCheck temperature logger and software
  • Stainless steel chamber with internal power outlet

The new SureTemp Incubator series provides the highest level of temperature control with uniformity and stability levels that are unmatched by competitive models in the same class

Each incubator is equipped with the SureCheck data logging system for verification of chamber temperature. The SureCheck system records temperature data points as often as every 60 seconds and stores this information on a flash drive. The data can be viewed and saved using the included SureCheck software. The recorded data can also be used to plot temperature points on a graph or exported to a spread sheet program for verification or storage/record keeping.


The Sure-Temp series offers Dual-Convection technology, allowing users to choose between mechanical convection mode for exceptional temperature uniformity OR gravity convection mode for longer incubations or drying or samples.


The heating elements are strategically located on multiple sides of the chamber.

Temp. Range Ambient +5 to 75°C
Temp. Accuracyt: ± 0.25°C*
Temp. Uniformity: ± 0.25°C*
Temp. Increment: 0.1°C
Temp. Stability: ±0.1°C
Timer: 1 min. to 99 hours 59 min. (or continuous)
Chamber Material: Stainless Steel (316)
Eletrical: 120V or 230V, 50-60Hz
Power Consumption: 40L: 420W / 70L: 520W / 130L: 670W

  H2505-40, 40 Liter Model H2505-70, 70 Liter Model H2505-130, 130 Liter Model
Interior Dimensions: 13.7 x 13.7 x 13.7 in. / 35 x 35 x 35 cm 17.7 x 13.7 x 17.7 in. / 45 x 35 x 45 cm 21.7 x 17.7 x 21.7 in. / 55 x 45 x 55 cm
Exterior Dimensions: 22.4 x 23.3 x 22.8 in. / 57 x 59.2 x 58 cm 26.4 x 23.3 x 26.8 in. / 67 x 59.2 x 68 cm 30.3 x 27.2 x 30.7 in. / 77 x 69.2 x 78 cm
Weight: 42 kg / 95 lbs 62 kg / 136.5 lbs 70kg / 154.4 lbs
Item#:
ASSHAKER13

STAT FAX 2200 Incubator/Mixer

The 2200 Incubator/Mixer is an economical combination incubator, timer, and shaker that
accommodates two standard microplates or strip trays. This microprocessor controlled instrument offers variable temperatures, times, and mixing speeds via the keypad. Incubation, timing, and mixing may also be used independently. A pulse mode is available. Temperatures may be set from room temperature to 40°C with a resolution of 0.1 degree. A smoke tint acrylic cover protects the plates, shields them from light, and insulates them during incubation. The enclosed system also reduces the risk of biohazard from the dispersal of aerosols.

 

SPECIFICATIONS:

Vessel:

holds 2 standard microtiter plates or strip trays

Aerosol guard:

smoke-tint acrylic cover

Incubator

Temperature range:

ambient to 40°C

Resolution:

0.1°C

Uniformity with cover:

better than +/- .4°C

Mechanism:

enclosed warmed aluminum bed with air circulation

Warm up time:

15 minutes typical, display temperature to check

Temperature detector:

thermistor, feedback, heuristic software

Mixer

Speeds:

8 mix speeds, from 575 to1500 rpm, timed duration on

continuous and mix pulse, 1500 rpm, for 3 second duration

Mechanism:

orbital mixing by rotating counterweight

Timer

Modes:

set time, view time remaining, audible signal, stop mixing

(maintains temperature control after time out)

Resolution:

one second

Range:

one second to 99 minutes 59 seconds

Power requirements:

12V AC, 50-60Hz, 2 amp, power unit available for 120V or

230V power sources. Use power unit approved for country

of use.

Certifications:

NRTL (US) listed at 115VAC input, CE Mark

holds 2 standard microtiter plates or strip trays

Dimensions:

approx. 10 x 12½ x 6 inches (26 x 32 x 16 cm) with cover,

7 lbs. (3 kg)

Item#:
SF2200
Your Price:
1071.43
Each

The BINDER incubator of the BD series with gravity convection is the specialist in long-term and stable continuous operation. This incubator is specially designed for gentle incubation of organisms, as well as conditioning of heat-sensitive media or microbiological heating.
Features:

  • Temperature range: ambient temperature plus 5°C to 100°C
  • High temperature accuracy thanks to APT.line⢠technology
  • Natural convection
  • Controller with LCD display
  • Electromechanical control of the exhaust air flap
  • Inner door made of tempered safety glass
  • 2 chrome-plated racks
  • Units up to 115 L are stackable
  • Class 3.1 integrated independent temperature safety device (DIN 12880) with visual alarm
  • Ergonomic handle design
  • USB port for recording data
  • Excellent temporal and spatial temperature accuracy and high energy efficiency

Series BD Specifications:

 

BD056UL-120V *

BD115UL-120V *

BD260UL-120V *

Description

 

 

 

 

Item Number

9010-0324

9010-0326

9010-0330

Performance Data Temperature

 

 

 

Temperature range 5°C above ambient temperature to [°C]

100

100

100

Temperature variation at 37°C [± K]

0.5

0.4

0.4

Heating-up time to 37°C [min]

45

55

90

Recovery time after 30 seconds door open at 37°C [min]

14

16

20

Measures - Outer dimensions

 

 

 

Width net [in]

22.06

27.97

31.91

Height net [in]

24.63

28.96

38.02

Depth net [in]

22.26

23.84

29.94

Exhaust duct outer diameter [in]

2.05

 

 

Interior volume [cu.ft.]

2

4

8.9

Measures - Internal Dimensions

 

 

 

Width [in]

14.18

20.09

24.03

Height [in]

16.55

20.88

29.94

Depth [in]

14.97

16.55

21.47

Fixtures

 

 

 

Number of shelves (standard/maximum)

4-Feb

5-Feb

8-Feb

 

 

 

 

* All technical data is specified for unloaded units with standard equipment at an ambient temperature of +22 °C ±3°C and a power supply voltage fluctuation of ±10%. The temperature data is determined to BINDER factory standard following DIN 12880, observing the recommended wall clearances of 10 % of the height, width, and depth of the inner chamber. All indications are average values, typical for units produced in series. We reserve the right to change technical specifications at any time.

Item#:
ASSHAKER26

Shel Labs - Drosophila

Incubator,19.3 cu. ft

Expanding on our current thermoelectric (Peltier) refrigerated incubators, the Drosophila units utilize day/night controls along with LED< lighting to provide an excellent environment for drosophila culture. The cabinets are designed with< a mechanical convection system to ensure a gentle and even air distribution. A programmable day/night microprocessor temperature controller and over temperature limit control ensure a proper and safe environment.


The energy saving thermoelectric cooling system< provides improved temperature uniformity and up to 78% less power than traditional compressor based models. These units are covered under a two year< warranty and are certified to current global standards.

Precise Temperature Control-Superior Uniformity
Independent Over Temperature Thermostat
-Door Ajar Alarm
-Temperature Range 15C to 40C at 20C Ambient

2 year warranty

LI-FLY

Exterior Dimensions (wxdxh)

30.0x31.5x69.5"

Chamber Dimensions (wxdxh)

25.5x24.0x54.5"

Incubator Chamber Capacity

19.3 cu ft

Interior Outlet

110V-1, 220V-2

Number of Shelves

5

Item#:
SRI20PF
Your Price:
8544.00
Each
  • Six (6) sturdy shelves that will not sag or bend under heavy loads.
  • Microprocessor Control
  • Viewing Window
  • Accomodates Roller Bottle Apparatus
  • Powder Coated White Interior
  • Supplied with 6 Shelves
  • 4 Interior Outlets
  • 2 year limited warranty

Reach In The Model RI28 incubator provides extra-large capacities while minimizing the amount of floor space used. This large space is kept uniform by intergrating a highly responsive mircoprocessor with the appropriatly sized heating element. A totally independent secondary temperature controller offers the added security of over-temperature protection. Our unique forced air circulation system creates a one-pass circulation pattern that provides both exceptional temperature uniformity and rapid heat recovery. The chamber floors are ruggedly reinforced to support roller apparatus or shakers.

RI28
RI40
Capacity
30.8 Cu.Ft. 
38.6 Cu.Ft.
Interior Dimensions WxDxH in.
32.2 x 26 x 63.5 
35 x 26 x 73.2
Exterior Dimensions WxDxH in. 
38.5 x 34 x 75.3
41.5 x 34.8 x 87.5
Temperature Range
Ambient +8 to 70°C
Ambient +8 to 70°C
Temperature Uniformity
+/-0.8°C at 37°C
+/-0.8°C AT 37°C
Electrical Specifications
Volts: 120V Hertz: 50/60Hz Watts: 1485W Amps: 8.5A
Volts: 120V Hertz: 50/60Hz Watts: 1650W Amps: 12.5A
Shelving
6 Supplied (16 Maximum)
6 Supplied (20 Maximum)
Access Port
One
One
Interior Outlet
Four
Four
Weights (lbs)
500
850
Warranty
2 year limited warranty
2 year limited warranty
Item#:
ASSHAKER7

SHEL LAB Diurnal Plant

Growth Chamber, 20.3 cu.ft.,

This illuminated growth chamber features dual-program selector dials, which allows control of two temperature conditions and an ON/OFF illumination cycle relative to the program selected. Each system operates independently allowing for simulation of a diurnal cycle, such as an eight hour day cycle of 30°C with light followed by a sixteen hour night cycle of 18°C without light. Forced air circulation ensures the most reproducible test conditions. The chamber air is gently and continuously circulated at a rate that ensures temperature uniformity of all test samples.

The unit is equipped with a hermetically-sealed compressor and an independent over temperature safety controller. It also includes a circuit breaker to protect from electrical overload, four fixed shelves, adjustable leveling feet, a condensation drip tray, a steel exterior with welded seams and corners, and a double-coated, baked enamel finish. In addition, one amp interior outlet allows use of shakers, stirrers, roller bottles or other apparatus.

SHEL LAB Diurnal growth chambers are designed for studies requiring day and nighttime simulation. Units include:

  • Day/Night Light and Temperature Control
  • Microprocessor Control
  • LED Display of Set point and Chamber Temperature
  • High and Low Limit Temperature Protection
  • Interior Electrical Outlet
  • Fan Assisted/Forced-Air Circulation
  • Hermetically Sealed Compressor
  • 24 month limited warranty

 

Specifications:

LI15

Capacity (cu.ft.)

17.0

Interior Dimensions (WxDxH) inch.

27 x 24 x 58

Exterior Dimensions (WxDxH) inch.

34 x 33 x 77

Temp Range:

0°C to 40°C (at 20°C ambient)

Temp Uniformity:

±0.5°C at 20°C

Standard B.O.D. Bottle Capacity:

317

Shelving:

4 supplied

Interior Outlet:

1

Item#:
SRI21D
Your Price:
8011.00
Each
  • Microprocessor Control System
  • P.I.D. Temperature Control
  • LED Display of Set point and Chamber Temperature
  • Interior Electrical Outlet
  • Fan Assisted/Forced-Air Circulation
  • TUV Certified
  • 2-year Limited Warranty

Model LI6P B.O.D. Thermoelectric Cooled Incubator, 6.5 cu.ft. (120 Bottle) Capacity. Using innovative thermoelectric cooling technology, the LI6P eliminates the need for a refrigeration compressor. This means that these units use 78% less power than alternative models and reduce room air conditioning loads by 75%. They also include 75 pound capacity shelves, which eliminates sagging. These incubators meet APHA specifications for Biochemical Oxygen Demand (BOD) and include a mechanical convection system to ensure even air distribution, digital temperature set controller, over temperature limit control, and a digital temperature display.


A one amp interior outlet allows use of shakers, stirrers, roller bottles or other apparatus. Units are supplied with adjustable leveling feet.


Low Temperature Incubators are ideal for testing of sewage and wastewater, as well as other low and room temperature applications.


Capacity

6.5 cu.ft. (185 L)

Interior Dimensions WxDxH in. (cm)

25.5 x 24 x 18.5 (64.7 x 60.9 x 46.9)

Exterior Dimensions WxDxH in. (cm)

30 x 31.5 x 33.5 (76.2 x 80.1 x 85.1)

Temperature Range

15°C to 40°C (at 20°C ambient)

Temperature Uniformity

+/- 0.5°C at 20°C

Electrical Specifications

120 V or 220 V

Capacity of Standard B.O.D. Bottles

120

Temperature Control

0.1°C Display Increments

Shelving

2 Supplied, Adjustable

Interior Outlet

110V-1

MIDSCI is not responsible for lost product or damages incurred to product in the case of freezer or refrigerator malfunction.

Item#:
SRI6P
Your Price:
4476.00
Each
  • Microprocessor Control System
  • P.I.D. Temperature Control
  • LED Display of Set Point and Chamber Temperature
  • Interior Electrical Outlet
  • Fan Assisted/Forced-Air Circulation
  • TUV Certified
  • 2-year Limited Warranty

Model LI20P B.O.D. Thermoelectric Cooled Incubator, 19.3 cu.ft. (300 Bottle) Capacity. Using innovative thermoelectric cooling technology, the LI20P eliminates the need for a refrigeration compressor. This means that these units use 78% less power than alternative models and reduce room air conditioning loads by 75%. They also include 75-pound capacity shelves, which eliminates sagging. These incubators meet APHA specifications for Biochemical Oxygen Demand (BOD) and include a mechanical convection system to ensure even air distribution, digital temperature set controller, over temperature limit control, and a digital temperature display.


A one amp interior outlet allows use of shakers, stirrers, roller bottles or other apparatus. Units are supplied with adjustable leveling feet.


Low Temperature Incubators are ideal for testing of sewage and wastewater, as well as other low and room temperature applications.


Capacity

19.3 cu.ft. (546 L)

Interior Dimensions WxDxH in. (cm)

25.5 x 24 x 54.5 (64.7 x 60.9 x 138.4)

Exterior Dimensions WxDxH in. (cm)

30 x 31.5 x 69.5 (76.2 x 80.1 x 176.6)

Temperature Range

15°C to 40°C (at 20°C ambient)

Temperature Uniformity

+/- 0.5°C at 20°C

Electrical Specifications

120 V or 220V

Capacity of Standard B.O.D. Bottles

300

Temperature Control

0.1°C Display Increments

Shelving

5 Supplied, Adjustable

Interior Outlet

110V-1

MIDSCI is not responsible for lost product or damages incurred to product in the case of freezer or refrigerator malfunction.

Item#:
SRI20P
Your Price:
6156.00
Each

Shaker Orbit LS Low Speed

with 30X30cm Platform 120 Volt
  • Economical analog control with easy-turn knobs
  • 19 mm orbit for blotting, gel staining and general mixing
  • Streamlined design
  • Safe for cold room and incubator use
  • 1 Year Warranty

The Orbit LS low speed shaker is a high quality, general purpose shaker with economical analog control.

Styled after the other models in the line, the Orbit LS features a streamlined, compact design with easy-access control panel. Electronic controls are utilized for setting speed and time. The knobs used for selecting parameters turn easily and are clearly marked with corresponding values.

A large orbit and low speed make the Orbit LS useful for staining and destaining gels, washing blots and general mixing. The shaker is supplied with a 30 x 30 cm stainles steel flat platform and non-slip rubber mat to keep plates, dishes and other sample containers in place.

Safe for use in temperature controlled environments, the small profile of this shaker makes it ideal for use in incubators such as the Labnet 311 and 611 series.

Product Specifications
Speed range 3 - 60 rpm
Timer 20 - 120 min (10 min inc.) or continuous
Motion Circular, 19 mm
Maximum load 11 lb/5 kg
Ambient operating range +4° to 70°C
Dimensions (W x D x H) 10 x 12.6 x 6.3 in/25.5 x 32 x16 cm
Weight 14.5 lb/6.6 kg
Electrical 120V~, 60 Hz or 230V~, 50 Hz
Item#:
S2030-LS
Your Price:
1322.47
Each

Shaker Orbit 300 Digital

Vortexer Without Platform

Three interchangeable platforms (available separately) accommodate a variety of sample containers to make the Orbit 300 a truly multipurpose shaker. The flat platform, covered with a nonslip rubber mat, holds plates, dishes, boxes, etc. The microplate platform will accommodate up to four microplates. The remaining platform has spring loaded retaining bars that adjust to hold flasks, bottles, racks and other containers in place.

Time and speed are set and displayed digitally. Values are shown on the large, three digit LED. The broad speed range allows the Orbit 300 to be used for gentle mixing as well as vigorous agitation.

The shaker housing is constructed of heavy gauge, coated steel to reduce motor noise and lend stability to the unit. This compact shaker can be used in temperature controlled environments making it ideal for cold room or incubator use.

Specifications for Labnet Orbit 300 Multipurpose Vortexer S2030-300:

Speed range: 
100 - 1200rpm
Timer: 
0 to 99 minutes or continuous
Motion/orbit size: 
Horizontally circular, 3 mm
Maximum load: 
12.3 lb/5.6 kg
Ambient operating range : 
+4° to 65°C
Dimensions (W x D x H) : 
10.1 x 12.5 x 5 inches/25.6 x 31.7 x 12.7 cm
Weight: 
16 lb/7.3 kg
Electrical*: 
120V~, 60 Hz

Features of Labnet Orbit 300 Multipurpose Vortexer S2030-300:

  • Three versatile platform options
  • Shaking, mixing, agitating or vortexing
  • Heavy-duty construction
  • Safe for cold room or incubator use

Platform Options

S2030-12 Platform, 30x30cm with non-slip rubber mat
S2030-13 Platform, Spring Bar
S2030-10 Platform for 4 Microplates
Item#:
S2030-300
Your Price:
1812.04
Each

REFRIGERATED INCUBATOR,

2.4 CU FT, OUTLET, 115V
  • Microprocessor Control
  • P.I.D. Temperature Control
  • LED Display of Setpoint and Chamber Temperature
  • High Limit Thermostat
  • Interior Electrical Outlet
  • Fan Assisted/Forced-Air Circulation
  • Hermetically Sealed Compressor
  • 2-year Limited Warranty

The LI5 space-saving low temperature incubator is ideal for small volume workloads and meets APHA specifications for Biochemical Oxygen Demand (B.O.D.) analysis.


Units are equipped with a hermetically-sealed compressor, a circuit breaker to protect from electrical overload, and an easy-to-clean fully insulated chamber that is corrosion-resistant. Gentle, continuous forced-air circulation ensures temperature uniformity and reproducible test conditions. Each unit also includes an independent over temperature safety controller, two shelves (adjustable in two inch increments), and a one amp interior outlet to allow the use of shakers, stirrers, roller bottles or other apparatus. This unit has a steel exterior with welded seams and corners and a double-coated, baked enamel finish. It is supplied with adjustable leveling feet and a condensation drip tray.


Low Temperature Incubators are ideal for testing B.O.D. of sewage and waste water, as well as other low and room temperature applications.


Capacity

2.4 Cu.Ft. (68 L)

Interior Dimensions WxDxH in. (cm)

16 x 12 x 21.5 (40.6 x 30.4 x 54.6)

Exterior Dimensions WxDxH in. (cm)

24 x 21 x 33.8 (61 x 53.4 x 85.8)

Temperature Range

0°C to 45°C (at 20°C ambient)

Temperature Uniformity

+/- 0.5°C at 20°C

Electrical Specifications

120 V or 220 V

Capacity of Standard B.O.D. Bottles

62

Shelving

2 Supplied

Interior Outlet

110V-1

MIDSCI is not responsible for lost product or damages incurred to product in the case of freezer or refrigerator malfunction.

Item#:
SRI3
Your Price:
2886.00
Each
View: