Lab Rockers, Lab Shakers, & Vortexers

At MIDSCI, we carry a top of the line, cutting-edge, selection of lab rockers, lab shakers, and vortexers.

 

We stand by our lab shaker, lab rocker, and vortexer equipment as many carry multi-year warranties. 
  
Beyond just warranties, our selection of products carry numerous features sure to suit your applications and needs. 
  
For instance, if you require superior mixing action for gels and blots, then our single platform lab rocker is right for you. It’s made of industrial-duty components, maintains a set speed, and is cold-room safe. Not to mention, the degree of tilt is infinitely adjustable in a matter of seconds. 
  
If you’re shopping for a lab shaker, then perhaps the SCILOGEX SK-O330-Pro Digital Orbital Lab Shaker is what you need. It’s perfect for bioreactors and CO2 incubators and has a 100-500 RPM shaking speed range. 
  
And we have a full suite of benchtop vortexers and incubated vortexers for you to take a look at as well.

 

|◀ 25 - 36 of 76 ▶|
View:
  • Large capacity - process 60 microtubes or 4 microplates
  • Resuspending, homogenizing, mixing or vortexing
  • Sturdy, compact construction
  • Suitable for cold room or incubator use
  • The smallest of the Orbit digital shakers, the M60, P2 and P4 feature variable speed across a broad range, making them useful for a variety of applications. Both time of operation and shaker speed are set and displayed digitally, with their values shown on the large 3 digit LED. Parameters are selected with an easy turn knob. A sturdy base encloses the motor for quiet, vibration free operation. All three models can be used in temperature controlled environments. Their compact size makes them ideal for incubator use.

    Orbit P2 Orbit M60 Despite its small size, the Orbit M60 can process up to 60 microtubes at one time. The platform is removable to function as a transfer rack or workstation. 1.5/2.0 ml tubes are accommodated directly while smaller tubes can be used with adapters, sold separately.

    Orbit P2 and Orbit P4 These vortexers accept all sizes of standard microplates, including deep well plates. Retaining springs on the contoured steel platform hold samples in place. The Orbit P2 holds two microplates while the Orbit P4 holds four.

    Product Specifications
    Speed range 100 - 1400rpm
    Timer 0 to 99 minutes or continuous
    Motion/orbit size Horizontaly circular, 3mm
    Maximum capacity M60: 60 x 1.5/2.0 ml microtubes
    Maximum load 0.66 lb/0.3kg
    Ambient operating range +4° to 65°C
    Dimensions (W x D x H) 6.6 x 11 x 6 inches/16.8 x 27.9 x 15.3 cm
    Weight 9.5 lb/4.3 kg
    Electrical* 120V~, 60 Hz
    *Other voltages available upon request
Item#:
ASVORTEX7

Four platform configurations allow the Orbit 1000 Digital Shaker to meet a variety of shaking and mixing applications. Single and double flat platforms hold trays, plates and dishes. The double platform allows for expansion of the shaker capacity without increasing the footprint. The universal platform has spring loaded bars that adjust to fit flasks, bottles, tube racks and odd shaped containers. Predrilled to hold Erlenmeyer clamps (clamps sold separately), the flask platform is ideal for mixing and growing cultures. Platforms are removable and interchangeable.

At the heart of the Orbit 1000 are a powerful brushless motor and counter balanced shaker mechanism that provide smooth operation and years of trouble-free use. Speed and time are set with an analog knob, while the set and current values are displayed digitally. Speed is adjustable over a broad range to allow for applications such as staining and destaining gels, growth of bacterial cultures and hybridization. The Orbit 1000 Digital Shaker is safe for use in temperature controlled environments. Its small footprint and low profile make it ideal for use in incubators. Platforms sold separately.

Product Specifications
  Orbit 1000
Speed Range 20-300rpm
Timer 0-99min or continuous
Motion Horizontally circular
Orbit 19mm
Maximum Capacity 4x1L
5x500mL
9x250mL
16x125mL
Maximum Load 4kg
(8.8lb)
Ambient Operating Temperature +4°C to 65°C
Dimensions 25.6cmx31.8cmx12.7cm
(10.1"x 12.5"x5")
Weight 7.3kg
(16lb)
Power Requirements 120VAC, 60Hz
Other voltages available on request
Item#:
ASSHAKER29

Orbi-Shaker XL

  • High capacity benchtop shaker with 18x18" platform
    • accommodates tube racks, flasks, plates, dishes, bottles & boxes
    • shake as many as 5x2L flasks or 9x1L flasks simultaneously
  • Circular 19mm orbit
    • ideal for mixing & aeration applications
  • Recommended to use with MAGic Clamp platform
    • Permits split second clamp switch out

Specifications:


Speed:

Variable, 30 to 300 rpm

Orbit:

19mm / 3/4 in.

Max. Capacity:

5 x 2L or 9 x 1L

Max. Load:

65 lbs (30kg)

Speed Increment:

1 RPM

Platform Dimensions:

17.8 x 17.8 in./ 45 x 45 cm

Dimensions: (w x d x h)

18.5 x 21.25 x 5 in. / 47 x 54 x 12.5 cm

Weight:

65 lbs (30kg)

Timer:

1 min. to 48 hours / continuous

Electrical:

115 or 230V, 50-60Hz, 450W

Warranty:

2 Years

Platform and Accessories:

IS-1010-PLAT MAGic Clamp universal platform, (18x18")

IS-50

Flask Clamp, 50ml (max. 49)

IS-125

Flask Clamp, 125ml (max. 36)

IS-250

Flask Clamp, 250ml (max. 25)

IS-500

Flask Clamp, 500ml (max. 16)

IS-1000

Flask Clamp, 1000ml (max. 9)

IS-2000

Flask Clamp, 2000ml (max. 5)

IS-1550

Tube Rack, 20x50 & 30x15ml tubes (max. 4)

IS-T15

Tube Rack, 32x15ml tubes (max. 8)

IS-T50

Tube Rack, 15x50ml tubes (max. 8)

IS-T600

Bottle Rack, 4x500/600ml conical bottles (max. 4)

IS-T15H

Tube Rack, 12x1.5/2.0ml horizontal (max. 6)

IS-T150H

Tube Rack, 4x15ml horizontal (max. 8)

IS-T500H

Tube Rack, 2x50ml horizontal (max. 8)

IS-SP

Spring loaded platform, for uncommon vessels

IS-MP

6xmicroplate platform (standard or deepwell)

Item#:
ASSHAKER27

Orbi-Shaker CO2 XL orbital

shaker with flat mat platform

The Orbi-Shaker XL offers flask capacity that far exceeds that of most benchtop models. With a large 18 x 18 inch platform and a powerful, beltless motor drive, the Orbi-Shaker XL is capable of mixing up to five 2L flasks or nine 1L flasks simultaneously. The included, non-slip rubber mat platform is ideal for low speed applications, while the convenient MAGic Clamp platform is also available for high speed mixing of Erlenmeyer flasks, tube racks or microplates. The MAGic Clamp allows for instant flask clamp exchange without the use of tools, screws or any other hardware.

A remote control is included to allow for setting adjustments of time or mixing speed without opening the door disrupting the CO environment. The remote module can be stored outside of the chamber and connects to the shaker via flat (1mm thickness) cable, that easily passes through a port underneath incubator door without compromising the seal. The remote module magnetically attached to the side of the incubator.

Technical Specs


Speed

Variable 30 to 300 rpm

Orbit

19mm/¾ inch

Max Capacity

5 X 2L or 9 X 1L

Max Load

65 lbs/ 30kg

Speed Increment

1 rpm

Platform Dims

17.8 X 17.8 in/45 x 45 cm

Overall Dims

18.5 X 21.25 X 5 in/ 47 X 54 X 12.5 cm

Weight

65 lbs/ 30 kg

Timer

1 min. to 48 hours/continuous

Electrical

115V or 230V, 50-60 Hz, 450W

Warranty

2 years

Flask Capacities


Flask Size

Maximum Quantity

50mL

49

125mL

36

250mL

25

500mL

16

1L

9

2L

5

Item#:
OS-4000-XL
Your Price:
4105.00
Each

Orbi-Shaker CO2 Resistant

All Environment Shaker w/
  • For optimal growth of suspension cells
  • Designed for use in CO2 incubators
  • CO2, Temperature and Humidity compatible
  • Remote controllable - adjust settings without opening incubator door
  • Change flask clamps instantly with MAGic Clamp magnetic platforms
  • 2 year warranty

The new Orbi-Shaker CO2 resistant shaker is designed for shaking, mixing, and aeration applications in extreme environments, including CO2 incubators. It can withstand temperatures from 0-60°C, humidity levels up to 100%, and won't corrode in a CO2 environment.

To avoid contamination, unintentional release of gas or deviations from protocol, both speed and time are set via the included remote control module. The remote controller allows the user to set and adjust the shaker settings without opening the chamber doors.

The instrument is supplied with a 13"x12" non-slip platform. In addition, convenient MAGic Clamp platforms (large or small), are also available for use with Erlenmeyer flasks and test tube racks. The unique magnetic attachment method has been widely recognized as the easiest way to instantly change between flask clamps of different sizes.

 

Speed Range:

30 to 300rpm

Speed Increment:

1rpm

Orbit:

19mm

Max Capacity:

2 x 2L or 5 x 1L Flasks

Platform Dimensions:

Rubber Non-Slip Mat (included)
Small Magnetic Platform (#IS-PLAT)

 

13" x 12"
9.5" x 11.5"
14" x 12"

Operating Temp:

0-60°C

Weight:

25 lbs.

Dimensions:

Shaker
Remote Control
Cord Length:

 

11.9 x 13.4 x 3.5 inches
7.2 x 6.7 x 3.5 inches
60.5 inches

Electrical:

120V

Attachment Capacity Table for OS-4000 CO2 Shaker:

Attachment:

Description:

with IS-PLAT platform

with OS-PLAT platform

IS-50

50ml Flask Clamp

20

30

IS-125

125ml Flask Clamp

12

24

IS-250

250ml Flask Clamp

8

14

IS-500

500ml Flask Clamp

5

9

IS-1000

1000ml Flask Clamp

4

5

IS-2000

2000ml Flask Clamp

1

2

IS-1550

15/50ml Tube Rack

1

2

IS-T15

15ml Tube Rack

2

3

IS-T50

50ml Tube Rack

2

3

IS-T600

500/600ml Bottle Rack

1

2

Item#:
OS-4000
Your Price:
3085.00
Each

Nor-Lake BOD Refrigerated

Incubator, 20.3 cu. Ft.

Standard Product Features:

  • Programmable logic microprocessor controller with LCD Control Panel with message center
  • 4 x 20 character LCD display
  • Continuous product temperature Hi/Lo alarms, audible and visual
  • Programmable ramp soak feature
  • 2 levels of user password protection (set points and parameters)
  • 100 event alarm logging including Date/Time Stamp and product temperatures. Stored in nonvolatile flash memory
  • Integrated Hi/Lo alarm tests
  • Power failure alarm
  • Remote alarm contacts
  • Proportional control and capacity output
  • White interior, exterior, door and handle
  • 5 wire shelves and bottom shelf
  • 1 wire shelf adjustable
  • Streamlined refrigeration design optimizes air flow and temperature uniformity
  • Selectable on demand auto defrost
  • Key lock door
  • 2 adjustable leveling legs
  • Interior light
  • 1" diameter access port with plug
  • 5 full width door storage compartments, 1 tilt out wire door bin
  • Complete cabinet is foamed-in-place with CFC Free high density polyurethane foam insulation
  • Operating temperature: -10°C to 50°C
  • Warranties: 12 months parts

Performance:

Temperature Variation: ±0.6°C @ -10 to 50

The published temperature variation is derived from the maximum deviation of the thermocouple located nearest the chamber geometric center during the entire test period and divide by 2. (i.e.24.0°C min and 25.0°C max would be a variation of ± 0.5°C) Testing is based on 23.0°C, 50% RH ambient conditions and performed with type T-24 Ga. thermocouples with 1.0oz. brass slug attached. Note figures exclude defrost periods when operating at or below 2°C. Data may vary if; ambient conditions change, product load is added or other changes cause interference to chamber airflow.

External Dimensions: 32"W x 28-1/2"D x 80-3/8"H

Internal Dimensions: 20"W x 26.5"D x 57"H

20.3 cubic feet, 1 solid door

Voltage: 115V 60HZ Plug Type 5-15P

Shipping weight: 380 lbs.

Price does not include inside delivery, shipping, installation, freight, duties, insurance, and fees


FOB Hudson, WI Prices valid for 90 days

MIDSCI is not responsible for lost product or damages incurred to product in the case of freezer or refrigerator malfunction.

Item#:
LRI201WWW0
Your Price:
5627.00
Each

myTemp 65L

Incubator, 0 -60 C,heat/cool

One Model for Heating and Cooling with Accurate Temperature Control from 0° to 60°C


Overview
The myTemp 65 Incubator is designed to provide accurate and uniform temperature control from 0 to 60°C. The broad temperature range of the instrument expands the use of this incubator to both heating and cooling applications.


A large, digital display allows for visualization of the chamber temperature and the remaining incubation time, while an internal light is included for improved visualization of the chamber. In addition, a built in, internal outlet can be used to provide power to small instruments, such as shakers, rockers, etc.
With forced air technology and stainless steel inner construction, uniform heat transfer is ensured throughout the internal chamber. When set for sub-ambient temperatures, the powerful compressor is activated, quickly cooling the chamber to the desired temperature.


With an exterior height of 39 inches (100cm), the incubator is designed to be floor-standing, yet is also compact enough for bench-use. (Not recommended for use on benchtops taller than 32"/81cm). The instrument is supplied with two, adjustable height shelves, while additional shelves can also be purchased separately (item: H2365-SH).


Features

  • Accurate temperature control from 0° to 60°C
  • Powerful compressor maintains 0°C
  • Stainless-steel internal chamber
  • Internal power outlet for shaker, mixers, etc.
  • Sized for floor standing use or on bench-tops less than 32" tall

 

Technical Data

Temp. Range:

0°C to 60°C (RT-25°C to 60°C)

Temp. Accuracy:

0.5°C (at 37°C)

Temp. Uniformity:

+/- 1.0°C (at 37°C)

Temp. Increment:

0.1°C

Exterior Dimensions: (WxDxH)

21.25 x 21 x 39.35 in.

Interior Dimensions: (WxDxH)

15.75 x 12.75 x 19.75 in.

Capacity:

65L (2.3 cu. ft.)

Weight:

117 lbs

Refrigerant:

R134A

Electrical:

120, 60HZ or 230V, 50Hz (385W)

Warranty:

2 Years

Operating Temp. Range:

+10 to +30°C

Item#:
H2265-HC
Your Price:
2699.00
Each

The MultiTherm shaker is a temperature controlled vortexer useful for a variety of molecular biology applications.  Despite its modest 8 x 11 in. footprint, all popular tubes and plates are compatible, including as many as six 50ml tubes.  Speed, time and temperature settings are continuously visible on the LCD, simultaneously showing both actual and selected values.  Integral over-temperature control ensures long life, safety and sample integrity.

  • Two models available: Heat only and Heat/Cool
  • Interchangeable blocks for tubes 0.2ml to 50ml
  • Precision contoured wells for uniform heat transfer

 

MTH-1500

MTHC-1500

Temp. Range:

Ambient +5°C to 100°C

Ambient -20°C to 100°C

Heating Ramp Rate:

5°C/min

5°C/min

Cooling Rate:

N/A

2.5°C/min

Temp. Accuracy:

±1.0°C

±1.0°C

Speed Range:

200-1500 rpm or "off"

200-1500 rpm or "off"

Motion/Orbit:

Horizontal Circular/2mm

Horizontal Circular/2mm

Capacity:

Per selected block style

Per selected block style

Dimensions inch:

8.25 x 11.5 x 8.25

8.25 x 11.5 x 8.25

Weight:

18lb.

18lb.

Electrical:

120V

120V

Multi-Therm Blocks:


MTB-02

96 x 0.2ml or 1 PCR Plate

MTB-05

54 x 0.5ml

MTB-CMB

Combo 15 x 0.5ml and 20 x 1.5ml

MTB-15

35 x 1.5ml

MTB-20

35 x 2.0ml

MTB-12

24 x 12mm (200-1200rpm, ambient -10°C to 100°C)

MTB-150

12 x 15ml (200-750rpm, ambient -10°C to 100°C)

MTB-500

6 x 50ml (200-750rpm, ambient -10°C to 100°C)

Item#:
ASSHAKER5

The MultiTherm shaker is a temperature controlled vortexer useful for a variety of molecular biology applications.  Despite its modest 8 x 11 in. footprint, all popular tubes and plates are compatible, including as many as six 50ml tubes.  Speed, time and temperature settings are continuously visible on the LCD, simultaneously showing both actual and selected values.  Integral over-temperature control ensures long life, safety and sample integrity.

  • Two models available: Heat only and Heat/Cool
  • Interchangeable blocks for tubes 0.2ml to 50ml
  • Precision contoured wells for uniform heat transfer

 

MTH-1500

MTHC-1500

Temp. Range:

Ambient +5°C to 100°C

Ambient -20°C to 100°C

Heating Ramp Rate:

5°C/min

5°C/min

Cooling Rate:

N/A

2.5°C/min

Temp. Accuracy:

±1.0°C

±1.0°C

Speed Range:

200-1500 rpm or "off"

200-1500 rpm or "off"

Motion/Orbit:

Horizontal Circular/2mm

Horizontal Circular/2mm

Capacity:

Per selected block style

Per selected block style

Dimensions inch:

8.25 x 11.5 x 8.25

8.25 x 11.5 x 8.25

Weight:

18lb.

18lb.

Electrical:

120V

120V

Multi-Therm Blocks:


MTB-02

96 x 0.2ml or 1 PCR Plate

MTB-05

54 x 0.5ml

MTB-CMB

Combo 15 x 0.5ml and 20 x 1.5ml

MTB-15

35 x 1.5ml

MTB-20

35 x 2.0ml

MTB-12

24 x 12mm (200-1200rpm, ambient -10°C to 100°C)

MTB-150

12 x 15ml (200-750rpm, ambient -10°C to 100°C)

MTB-500

6 x 50ml (200-750rpm, ambient -10°C to 100°C)

Item#:
ASVORTEX5

Mortexer - The next generation Vortexer with increased power and flexibility!

The Mortexer is more than your standard vortexer.

The unique design of the Multi-Head (included) features:

  • A traditional cup head for general purpose mixing of conical tubes
  • Plus it holds up to 8 microcentrifuge tubes
  • Increased vortexing speed up to 3400 rpm
  • Q-Drive technology provides smooth vortexing action
  • Minimizes noise and excessive vibration
  • Cold room/Incubator compatibility
  • "No-Walk" Suction feet

Technical Data:


Speed Range

200 to 3400 rpm

Operating Modes

Touch or Continuous

Operating Temperature Range

+4°C to +65°C

Dimesions

5 x 6.3 x 6.7 in.

Weight

8.4lb / 3.8kg

Electrical

115V AC, 60Hz, 1.5A
230V AC, 50Hz, 0.75A
230V AC, 60Hz, 0.75A

Warranty

2 years

Accessories:

BV1000-FLAT Vortexer Flat head
BV1000-COMBO COMBO  head
BV1000-H15 Horizontal head, for 12 x 1.5ml
BV1000-H150 Horizontal head, for 4 x 15ml
BV1000-H500 Horizontal head, for 2 x 50ml
Item#:
ASVORTEX1

Mini Nutating Mixer with flat cord, 8x6" platform with dimpled & flat mats. Rocker is designed to fit inside LabDoctor Digital Mini Incubators (H2200-H/H220-HC). Rocker settings are fixed to 24rpm and 20° tilt with a 1-yr warranty.

Item#:
ASSHAKER21
  • Ideal for microbiology or hematology applications
  • Corrosion resistant chamber
  • Three shelf levels
  • Door with large viewing area
  • Pilot light to indicate heating
  • 1 year warranty

Labnet's Mini Incubator is compact and economically priced, yet offers features not typically found in a basic incubator. The housing is all metal, as is the door frame. A plexi-glass window in the door offers full visibility to the interior. One shelf is included, and can be adjusted to three different levels - additional shelves can be purchased to increase storage capacity.

The heating elements in Labnet's Mini Incubator are incorporated into the bottom and sides of the housing. This provides better temperature stability and uniformity than other incubators in it's class. A grommet hole in the top of the unit can hold a thermometer for accurate temperature setting.

In addition, the Mini Incubator has a port in the rear of the chamber which allows for an electrical cord to be routed out the back. Labnet's Mini LabRoller is a perfect fit and can be used in the Incubator with any of the available rotisseries.

Product Specifications
Exterior dimensions (W x D x H) 11.2 x 11 x 13.2 / 28.5 x 28 x 33.5 cm
Interior dimensions 9 x 7.9 x 7.9 in / 23 x 20 x 20 cm
Weight 18.4 lb / 8.3 kg
Capacity 0.375 cu. ft. (9.2L)
Temperature range ambient +5 to 60C
Controls analog
Stability +/- 0.6C at 37C (N.I.S.T. traceable thermometer
Uniformity 0.65C at 37C
Electrical 120V, 50/60 Hz, 0.6A; 230V, 50/60 Hz, 0.3A
Item#:
ASSHAKER10
|◀ 25 - 36 of 76 ▶|
View: