Microplate Readers and Microplate Washer

MIDSCI carries a line of low cost microplate readers and microplate washers that don’t sacrifice quality, performance, nor reliability.

Are you looking for a microplate reader and washer? You’ve come to the right place. We carry microplate readers and microplate washers that are right for you. 
  
If you need a compact and economical microplate reader that works with your computer without a hitch, then the Chromate microplate reader is a good choice. 
  
Yet if you want some convenient artificial intelligence on your side, then take a look at the Accuris microplate reader instead. It has an intuitive screen and provides measurement data, interpretations, and calculated analyses on the screen after a reading. 
  
Of course if it’s a microplate washer you’re looking for, then the Stat Fax 2600 is superb. Other than the expected features for a microplate washer (and more), it’s also convenient to use and extra quiet! 
  
This is just the tip of the iceberg. We’ve got a lot more to offer.

View:

CappWash plate washer is an ideal elisa plate washer for small scale work. Simple, compact and inexpensive. Fitting into even the tightest budget, Capp plate washer is a perfect alternative to dependence on department washers for washing micro plates and strips. Capp elisa plate washer works most effectively with a vacuum source.

Capp elisa plate washer requires no programming nor electrical wiring connections. It is made of a high-grade stainless steel and polypropylene, making it fully autoclavable and highly resistant to aggressive chemicals.

The unique Two-in-One Design of Capp elisa plate washer gives each tube 2 functions - delivery of the washing solution to the well and aspiration of the used solution back to the waste collection bottle. This is possible as each tube of Capp elisa plate washer consists of an inner tube that releases the distilled water washing solution into the wells for rinsing while the outer tube vacuums away the liquid upon completion of the washing procedure.

The washing process with Capp plate washer is as simple as it can be: Simply lower the tubes into the well then push the knob to fill and release the knob to empty. Now repeat for the desired amount of washings and move on to the next row.


Capp elisa plate washer is suitable for all well types. The plate washer can be set to the desired depth very easily by simply adjusting the two screws found on either side of the tubes

    • Easy to operate
    • Simple & robust design
    • Manual ELISA plate washer

    W-12 - CappWash plate washer 12-channel

    W-12KIT-115V - CappWash Kit including W-12, WP-115V, WB-1, WB-3, WB-4, and W-1000 (3 meters)

    CAPPWash Kit includes 12-channel plate washer, vacuum pump, wash-collection bottles and tubing. CAPPWash Microplate Washer is the ideal tool for small scale immune assays. Fitting into even the tightest budget, CAPPWash is a perfect alternative to dependence on department washers for washing microplates and strips.

      • Easy to operate
      • Simple and robust design
      • Fully autoclavable

    W-16KIT-115V- CappWash Kit including W-16, WP-115V, WB-1, WB-3, WB-4, and W-1000 (3 meters)

    W-16KIT-230V - CappWash Kit including W-16, WP-230V, WB-1, WB-3, WB-4, and W-1000 (3 meters)

Item#:
ASMICPLTWASH2
  • Ability to wash flat, round, and v-bottom plates and strips.
  • No user adjustments required, automatic calibration, alignment, and last row detection.
  • Large, non-volatile memory for up to 50 user-entered wash protocols.
  • Programmable, automatic rinse cycle.
  • Constant monitoring of vacuum and pressure.
  • Internal pumps cycle only when needed for extra quiet operation.
  • Comes ready to use with 3 bottles, aerosol shield, and 8-probe manifold
  • Plus model includes dual wash bottle system, individual row selection and built-in plate mixing function
  • 1 year warranty

Fluid Performance (With 8-Probe Manifold)

Residual Volume< 3µl
Dispense Accuracy< 3% CV at 300µl
Processing Time (Full Plate)55 seconds aspirate/dispense
Liquid Contact MaterialsStainless steel, Delrin, silicone, nylon, PVC, polypropylene


8 Probe Wash Head Standard (12 or 16 Probe Wash Heads Available)
     


Electronic

DisplayTwo-line LCD, alphanumeric, 24 characters per line
Keyboard16-key, domed membrane switch, 4 x 4, enunciating
Power Requirements115V, 50-60Hz (switch selectable)
Non-Volatile MemoryBattery supported RAM, holds approx. 50 wash protocols



Software

Washing ProgramsAspirate, dispense, soak - up to 99 minutes 99 seconds
Special Menu OptionsAuto Alignment - senses physical geometry of the
head, plate, and carrier mechanism
Standby - disables pumps and releases vacuum and pressure
Self-Check - performs internal performance tests alignment
Auxiliary - allows selection of pre-programmed tests, mechanism
and volume calibration, and alphanumeric test naming
Constant Plate Cycle Time
Optional Manual Plate Depth Selection

Other

BottlesPlastic, Wash and Waste (2L), Rinse (1L)
EnclosureFire-retardant ABS plastic cover with metal base
Dimensions15.5" x 13.5" x 7.5"
Weight19 lbs
Shipping Weight32 lbs.
CertificationsUL Listed & CE Mark

Item#:
ASMICPLTWASH1

Stat Fax 4200 Microplate Reader

The Stat Fax 4200 is a compact, standalone 8-channel microplate reader. Its streamlined design offers touch screen interface, rapid reading, superb optics, on board curve-fitting software, and built-in printer to meet the requirements of modern laboratories.

1 year warranty


Specifications

Photometric
Linear Measurement Range 0.0 to 4.0 Absorbance units (A)
Photometric Accuracy +/- 1 %
Stability Drift of no more than .0005A in 8 hours
Light Source Remote halogen lamp source w/ lamp saver feature
Wavelengths Standard: 405, 450, 492, and 630 nm
6 filter: 405, 450, 492, 545, 600, and 630 nm
Filter options available from 405 to 700 nm
Filter Type IAD hardcoat interference, 10 nm half bandpass
Vessel Standard 96 well microtiter
Electronic
Display Interactive 5.7❠(14.5 cm) graphical touch-screen LCD
Printer Thermal dot matrix, 64 characters per line, plus graphics.
Power Requirements 115 V or 230V AC, 50-60 Hz (auto-sensing)
Interface USB mouse
Speed Reads aborbances of 96 wells in about 10 seconds
Plate Transport Stepper motor
Certifications NRTL listed, CE marked
Software
Calculation Modes Single point calibration, point-to-point curve fit, polynomial. Regression, linear and sigmoidal regressions (log & linear), Cutoff absorbance, multipoint % absorbance
Additional Features User-programmable open system, selectable plate formatting
Alphanumeric test naming, automatic interpretation options, 
Duplicate well options, curve plotting and editing, flags and 
Error messages
Other
Enclosure Flame retardant ABS base and cover
Dimensions & Weight 7.5 X 13 X 16 inches (10 X 20.3 X 42 cm); 15 lbs (6.8 kg)
Item#:
SF4200
3857.1400
Your Price:
3857.14
Each
  • Compact and economical
  • Reads absorbances of 96-wells in under 10 seconds
  • Streamlined design to fit any lab bench
  • Ready to "plug and play" with your PC

MIDSCI introduces Chromate, a compact 8-channel microplate reader. Its streamlined design with minimal footprint offers superb optics to fit any sized lab bench. Chromate and your PC team up to provide rapid reading and full access to high level software, reporting, curve fitting, and data storage to meet the requirements of modern laboratories. Instrument and software come ready to "plug and play" with your PC.

Photometric:
Linear Measurement Range:

-0.20 to 4.0 absorbance units (A)

Photometric Accuracy:
±1%
Stability:

Drift of no more than 0.005A in 8 hours

Light Source:

Remote halogen lamp source with lamp saver feature

Wavelengths:

Standard: 405, 450, 492, and 630nm

Filter options from 405nm to 700nm

Filter Type:

IAD hardcoat interference, 10nm half bandpass

Vessel:

Standard 96-well microtiter plates, or strip trays

Electronic:

Power Requirements:

115V or 230V, 50-60Hz (auto-sensing)

PC Connection

USB port

Speed

Reads absorbances of 96 wells in about 8 seconds

 
Software:

Calculation Modes:

Single-point calibration, point-to-point curve fit, polynomial regression, linear and sigmoidal regression (log & linear), cutoff absorbance, multipoint % absorbance

Additional Features:

User-programmable open system, selectable plate formatting, alphanumeric test naming, automatic interpretation options, duplicate well options, curve plotting and editing, flags and error messages

Dimensions:

7.25 x 7.25 x 16.5 inches

Weight: 10 lbs.
Warranty
1 year
   

This unit can be customized with upgraded filters or more filters. Please contact your Lab Consultant or our Tech Department at 800-227-9997 for more information. The item # would be 4300-CUSTOM and is not available to order on-line. Prices may vary. Lead time is 4-6 weeks on the Custom orders.

Item#:
4300
2428.0000
Your Price:
2428.00
Each

Lumate Microplate Luminometer


LuMate is a compact microplate glow luminometer. Its streamlined design with minimal footprint offers superb optics to fit any size lab bench. LuMate teams up with your PC to provide full access to high level software for curve fitting, reporting, and data storage to meet the requirements of modern laboratories. Instrument and software come ready to "plug and play" with your PC.

Easy & Automatic


Simply select an assay from the stored menu and load the plate. LuMate automatically reads the plate, precisely measuring and reporting the light output from each well. LuMate runs hormones and many other applications, with on-board calculations for point to point, linear and log regressions, and log logit modes. A built in reference assures continuous calibration.

Specifications

Optical
Detection Mode Glow Luminescence
Sensitivity/Detection Limit HRP 1 X 10-18 moles, ALP 1 X 10-21 moles
Linear Dynamic Range 106 RLU
Cross talk Less than 2.5 X 10-4
Detector Photomultiplier (PMT)
Spectral Response Range 300-650 nm
Peak Wavelength 400 nm
Vessel 96 wells in strip tray or plate
Electronic
PC connection USB port
Microprocessor eZ80
Plate Transport Stepper motor
Power Requirements 100V-250 AC, 50-60 Hz (auto-sensing)
Software
PC Interface LuMate Manager Software
Calculation Modes Multipoint calibration with Regression or Point to Point curve fit with Curve storage option; Relative Light units
Additional Features

User-programmable open system with curve plotting and editing

Selectable plate formatting with duplicates and end-reading selections

Multiple timed reading options

Automatic interpretation options

Alphanumeric test naming

Flags and error messages

Other
Certifications NRTL listed, CE marked
Enclosure All metal enclosure
Dimensions 7.5 X 8 X 16 inches (19 X 20.3 X 42 cm); 11 lbs (5 kg)
Item#:
4400
4400.0000
Your Price:
4400.00
Each

Features:

  • Uses 12 mm round tubes, 1 cm square cuvettes, or built-in flow cell.
  • Read cell is temperature controlled to 37°C.
  • Bichromatic and Monochromatic reading.
  • Turbidimetric assay capabiliy.
  • 6 filters standard (340, 405, 505, 545, 580, 630nm), with spaces for 2 optional filters (340-880nm).
  • Flip-up 240 x 128 pixel graphic display shows kinetic plots in real time.
  • Use on-board thermal printer, external printer, or PC.
  • Create a work list, run tests, print patient reports. Stores patient data.
  • Stores control values and creates Levey-Jennings plots for QC.
  • IAD filters
Item#:
SF3300
3054.2900
Your Price:
3054.29
Each
View: